Digital signal processor (DSP Processor)
Digital signal processor (DSP)/DSP Processor is a special type of microprocessor (or a SIP block), with its architecture optimized for the operational needs of digital signal processing.
Digital Signal Processors (DSP processor) take real-world signals like voice, audio, video, temperature, pressure, or position that have been digitized and then mathematically manipulate them. A DSP is designed for performing mathematical functions like “add”, “subtract”, “multiply” and “divide” very quickly.
C6713DSK in CCSv5
What is inside a DSP processor?
A DSP contains these key components:
- Data Memory: Stores the information to be processed by processor
- Program Memory: Stores the programs which the DSP will use to process data
- Input/Output: Serves a range of functions to connect to the outside world
- Compute Engine:It performs the math processing, accessing the program from the Program Memory and data from Data Memory
Download board support files from Spectrum Digital Website.
Unpack all files to C:
Download CSL form TI website
Install it at C:C6xCSL directory
Set all of jumpers on SW3 and SW1 to OFF
Connect USB then connect power
Run 6713SDKDiag.exe from C:DSK6713drivers to check emulator connection
Following is a step by step guide to setup a DSP processor using Non real steps CCS v5.3 DSK6713
Click on ccs5.3.0 icon as shown below
Workspace window will get open select as default or you can give your location.
Close TI Explorer window
Create new target configuration
File–> new–> targetconfiguration
Connection: spectrum digital DSK-EVM-eZdsp on board USB emulatorBoard or device: TMS320C6713
Tools –> graph –> single time